Schneider TSXCFY11C

  • Schneider TSXCFY11C Coated Motion Control Module
Schneider TSXCFY11C Coated Motion Control Module

Schneider TSXCFY11C Coated Motion Control Module

  • Schneider TSXCFY11C
  • Coated Motion Control Module-Stepper Motor-Unity Pro-1 axis-3.8 W
  • Product description: Schneider TSXCFY11C Coated Motion Control Module-Stepper Motor-Unity Pro-1 axis-3.8 W
  • Notes:The picture on the left is for reference only, please refer to the actual product picture
  • mailto: 190807896@qq.com
  • INQUIRY
Note: The product description and picture display of model Schneider TSXCFY11C Coated Motion Control Module is for reference only, and the specific product description shall prevail.
Product packaging reference:
Product packaging reference

Schneider TSXCFY11C Coated Motion Control Module-Stepper Motor-Unity Pro-1 axis-3.8 W

main information
Product Series
Modicon Premium automation platform
product type
Motion control module
Application field
For stepper motors
Software authorization
Unity Pro
Additional information
I/O modular
1 axis
maximum pulse frequency
187 kHz
Power consumption W
3.8 W
Input type
Current sink auxiliary input conforming to EN/IEC 61131 type 2
Resistive amplifier input
Discrete input logic
Negative for amplifier input
Positive applicable auxiliary input
Input voltage
24 V 7 mA auxiliary input
5 V 4.5 mA amplifier input
Input voltage limit
19...30 V auxiliary input
Voltage state 1 guarantee
<2 V for amplifier input
>= 11 V for auxiliary input
Current status guarantee 1
>= 6 mA (auxiliary input)
Voltage state 0 guarantee
<= 5 V for auxiliary input
> 3.6 V for amplifier input
Current status guarantee 0
<= 2 mA (auxiliary input)
input resistance
3400 Ω for auxiliary input
Input immunity
<250 µs auxiliary input for self-guided cam and event input
15...30 µs amplifier input for step input loss
3000...10000 µs auxiliary input for limit switch, emergency stop and external stop input
3000...16000 µs amplifier input for amplifier fault input
Power monitoring
0…14 V auxiliary input fault state
18…24 V auxiliary input in OK state
Maximum detection time
<30 ms auxiliary input from fault to normal operation
> 1 ms auxiliary input from normal operation to fault state
Input compatible
With 2-wire/3-wire sensor for auxiliary input
Output type
Open collector PNP brake output conforming to EN/IEC 61131-2
RS422, compatible with TTL 5 V open collector NPN amplifier output
Output differential voltage
+/- 2 V <= 100 Ω amplifier output
maximum output short-circuit current
150 mA for amplifier output
Allowable universal mode voltage
7 V amplifier output
maximum permissible differential voltage
12 V amplifier output
The output voltage
24 V DC 19...30 V brake output
Rated output current
0.5 A <0.3 mA 0.625 A brake output
maximum voltage drop
<1 V in open state for brake output
switching time
<0.25 ms for brake output
Output compatibility
Positive logic DC input (resistance <= 15 kOhm) for brake output
Short circuit protection
Thermal trip through program or automatic brake output
Output overload protection
Current limiter Brake output
Output overvoltage protection
Zener diode brake output
Reverse polarity protection
Brake output: diode installed in the reverse direction of the power supply
Speed curve path
Trapezoid
Operation mode
Direct drive mode
automatic
shut down
Manual
an examination
Amplifier, limit switch, emergency stop
Consistency of instructions
The software executes the position restriction correctly, the steps are lost
Sensor power supply
Parameter validity period
Short circuit (one signal bit per channel)
Optional instructions
Boost
brake
Local signal indication
1 LED (green) Module operation (RUN):
1 LED (red) External fault (I/O):
1 LED (red) internal fault, module fault (ERR):
2 LED (green) axis diagnosis available (CH.):
Electrical connections
1 connector HE-10, 20-pin
1 connector SUB-D 15
Current consumption
510 mA at 5 V DC
50 mA DC
Module classification
standard
Product Weight
0.44 kg
Protection treatment
Conformal Coating Humiseal 1A33
surroundings
Operating temperature
0…60 °C
Storage temperature
-25…70 °C
Relative humidity
5…95% without condensation
Working altitude
<= 2000 m


Product physical map reference:
Schneider TSXCFY11C Coated Motion Control ModuleProduct physical map reference
Quanzhou Fengteng Automation sells original and brand-new Schneider TSXCFY11C Coated Motion Control Module at a special price. If you want to know the technical parameters, installation manual, user manual (user manual) or information, price, and goods of Schneider TSXCFY11C Coated Motion Control Module Please contact us for details.
Quanzhou Fengteng Automation Schneider TSX series PLC series product channel provides detailed product descriptions, product pictures and other information of Schneider TSXCFY11C Coated Motion Control Module.
Due to the wide variety of models, it is not possible to upload all of them, and the product promotion pictures may be inconsistent with the original product pictures, and the actual product shall prevail.
Our company's superior brands are for reference only. As long as you need to find them, you can send them to me, and we will reply you as soon as possible.
Original new products, in stock
Discount offer, low price feedback

Contact Us

Contact: Mr.wu

Phone: 0086+13808548642

Tel: 0086+13808548642

Add: 99 Luojiang District, Quanzhou, Fujian

Email: 190807896@qq.com

Notes: All products enjoy a 6-month warranty

Scan the qr codeClose
the qr code