Schneider TSXCCY1128C

  • Schneider TSXCCY1128C Electronic cam module
Schneider TSXCCY1128C Electronic cam module

Schneider TSXCCY1128C Electronic cam module

  • Schneider TSXCCY1128C
  • Electronic cam module-Modicon Premium-128cams-1 axis-7W-standard format
  • Product description: Schneider TSXCCY1128C Electronic cam module-Modicon Premium-128cams-1 axis-7W-standard format
  • Notes:The picture on the left is for reference only, please refer to the actual product picture
  • mailto: 190807896@qq.com
  • INQUIRY
Note: The product description and picture display of model Schneider TSXCCY1128C Electronic cam module is for reference only, and the specific product description shall prevail.
Product packaging reference:
Product packaging reference

Schneider TSXCCY1128C Electronic cam module-Modicon Premium-128cams-1 axis-7W-standard format

main information
Product Series
Modicon Premium automation platform
product type
Electronic cam module
Number of cams
128
Number of tracks
32
Module function
Eliminate axial tempering
Switch positive feedback
Measurement capture
Position, monostable, brake
Event generation
Position recalibration
Parts counter
I/O modular
1 axis
Circuit type
Auxiliary input positive conforming to EN/IEC 61131 type 1
Incremental encoder with 10...30V voltage positive or negative
Incremental encoder with RS422 differential
Additional information
Clock pulse frequency
200 kHz SSI absolute encoder
Incremental encoder frequency x1
500 kHz
Incremental encoder frequency x4
250 kHz
Power consumption W
7 W
maximum output refresh cycle
100 µs 32
200 µs 128
50 µs 16
Input compatible
Absolute encoder parallel output ABE7CPA11
Absolute encoder SSI serial output
Incremental encoder 10...30 V push-pull output circuit
Incremental encoder 5 V DC RS422/485 line transmitter
Input voltage
24 V 10...30 V encoder
24 V auxiliary input
Input Current
10 mA for RS422
15.5 mA for 10...30 V encoder
8 mA for auxiliary input
Input voltage limit
<= 5.5 V RS422
19...30 V 10...30 V encoder
19...30 V auxiliary input
Voltage state 1 guarantee
<= 11 V for 10...30 V encoder
> 3 V for RS422
<= 11 V for auxiliary input
Current status guarantee 1
>= 5 mA (10...30 V encoder)
>= 5.8 mA (RS422)
>= 3 mA (auxiliary input)
Voltage state 0 guarantee
<5 V for 10...30 V encoder
<= -3 V for RS422
<5 V for auxiliary input
Current status guarantee 0
<= 2 mA (10...30 V encoder)
<= -5.8 mA (RS422)
<= 1.5 mA (auxiliary input)
Response time
<100 µs for auxiliary input
input resistance
10...30 V encoder: 1500 Ω for nominal voltage
Auxiliary input: 3000 Ω for nominal voltage
Output type
Tracking output conforming to EN/IEC 61131-2
The output voltage
24 V DC
Rated output current
0.5 A
Rated current
<= 12 A per module
<= 6 A per connector
<= 0.6 A per output
Output voltage limit
19...30 V
Output compatibility
Positive logic DC input (resistance <= 15 kOhm)
maximum tungsten load
10 W
operating frequency
<0.6/LI² inductive load
Front drive voltage detection threshold
<14 V fault state
> 18 V OK state
Output overload protection
Restrictor
Thermal circuit breaker
Output short circuit protection
Thermal circuit breaker
Restrictor
Output overvoltage protection
Zener diode
Reverse polarity protection
Power reverse diode
an examination
Monitor power supply of front actuator
Local signal indication
1 LED (green) Processor running (RUN):
1 LED (red) I/O module failure or configuration error (I/O):
1 LED (red) Processor or system fault (ERR):
Electrical connections
1 connector HE-10 and 20-pin for connecting auxiliary input and encoder power supply
1 connector HE-10 and 20 pins for connecting the trace output on groups 0 and 1
1 connector HE-10 and 20-pin for connecting trace output on groups 2 and 3
1 connector SUB-D 15 for connecting incremental or absolute encoders
Current consumption
660 mA at 5 V DC
15 mA at 24 V DC
Module classification
standard
Product Weight
0.48 kg
surroundings
Electromagnetic discharge time
<L/R s
Protection treatment
Conformal Coating Humiseal 1A33
TC
Operating temperature
0…60 °C
Storage temperature
-25…70 °C
Relative humidity
10…95% without condensation for operation
5…95% without condensation for storage
Working altitude
0...2000 m


Product physical map reference:
Schneider TSXCCY1128C Electronic cam moduleProduct physical map reference
Quanzhou Fengteng Automation sells original and brand-new Schneider TSXCCY1128C Electronic cam module at a special price. If you want to know the technical parameters, installation manual, user manual (user manual) or information, price, and goods of Schneider TSXCCY1128C Electronic cam module Please contact us for details.
Quanzhou Fengteng Automation Schneider TSX series PLC series product channel provides detailed product descriptions, product pictures and other information of Schneider TSXCCY1128C Electronic cam module.
Due to the wide variety of models, it is not possible to upload all of them, and the product promotion pictures may be inconsistent with the original product pictures, and the actual product shall prevail.
Our company's superior brands are for reference only. As long as you need to find them, you can send them to me, and we will reply you as soon as possible.
Original new products, in stock
Discount offer, low price feedback

Contact Us

Contact: Mr.wu

Phone: 0086+13808548642

Tel: 0086+13808548642

Add: 99 Luojiang District, Quanzhou, Fujian

Email: 190807896@qq.com

Notes: All products enjoy a 6-month warranty

Scan the qr codeClose
the qr code